A
scroller is an accessory that slips into the colorframe holder of most
spotlights & some
floods. It makes one light seem like many because now you
have a light that can produce a rainbow of color. The
scroller it's self is DMX-512 compatible and is easily controlled
from DMX-512 controllers. Scrollers contain a
gelstring that moves on two rollers. They hold from 2 to 32
frames of color gels. The rollers are moved by small DC motors.
The motor and scroller get a combined
power and data signal through the power supply. The power
supply also acts as a distribution point for the combined
power and data signal via 4 pin XLR cables. Power
supplies are made to power 2, 6, 8, 12, 16 or 24 scrollers
depending on the size of your system. Scrollers
are being manufactured in many sizes to fit almost
any spotlight and cyclights, even 4 light and 8 light banks.
|
DMX
signal comes from DMX controller through 5 pin XLR
cable to the power supply. Power supply distributes
combined power and DMX control signals to the scrollers
thru 4 pin XLR cables. Power supply will need120AC
@ 5A -10A to function. |
|
Original
Chroma-Q
Upon its introduction,
the
original Chroma-Q
revolutionized the world of
color changers. Its unique
design and low cost still
make it one of the best
value for money lighting
accessories available
today. The original Chroma
-Q is perfectly suited for
fixtures rated up to 1200
watts. Design features
include quick access hinges
and removable rollers
allowing Color scrolls to be
accessed and changed
without any tools.
|
|
Chroma-Q
Broadway
The Broadway is
specifically designed for
low noise environments
and features a cooling
system made of three
low noise fans. With its
patented constant
tension system your color
scroll will remain evenly
aligned and tensioned at
all times. The Chroma-Q
Broadway fits a wide
range of smaller, aperture
fixtures, including the
ETC Source 4 and
Altman Shakespeare.
|
|
Chroma-Q M2
Incorporating
the same
design features as the
original Chroma-Q inside
a metal enclosure, the
M-Range are designed
for use with less
common fixtures. The
M1 can be used with a
wide range of 575, 650
and 1000 watt fixtures,
the M2 with fixtures
ranging up to 2000 watts
and the M5 with fixtures
ranging up to 5000 watts.
|
|
Color
scroller cable carries both power and data to your
scrollers. 14 gauge pair for power, 22 gauge pair for
data. PVC jacket, Neutrik 4 pin XLR terminations. Compatible
with Wybron, Chroma-Q and Rainbow Scrollers. |
|
3
sizes of Power Supplies.
Pick the one for your
application. PS-02 is used
to run just 2 Scroller units.
PS-08 allows for a peak
draw of 8.1 Amps, with
cable loops up to 200ft.
The larger PS-18/2 allows
a peak draw of 16.2
Amps, with cable loops up
to 200ft. on each of its 2
Chroma-Q circuits.
|
