|
High specification dimmers for installation, available in
4, 6, 12 and 24 channel formats
The Chilli range offers a high density dimming solution
whilst retaining ease of installation. The intuitive Chilli
user interface allows operators to quickly set up and operate
the dimmers. Using intelligent design, the Chilli range offers
an efficient and reliable solution to a range of dimming
applications. The user interface, comprising a backlit 16
button numeric keypad and LCD screen, ensures that even in
the dark the full range of Chilli features can be accessed.
DMX addressing, preheat and dimmer curves can all be set
with minimum fuss.
The Chilli provides a built in programmable backup memory
and a choice of responses to a DMX failure. Installation
of the Chilli dimmer is simple. The unit is located by two
screws and secured by a further two. The front panel is easy
to remove for installation and maintenance. The ease of installation
and commissioning ensures a minimal time on site.
The Chilli dimmer provides exceptional control for DMX applications,
but with the addition of our external control units, a host
of new applications and system designs become available.
With applications that range from controlling the lights
in a small bar to high end theatrical control, the Chilli
dimmer range provides an out-of-the-box solution for different
applications. Using our custom-written ChilliNet protocol,
the Chilli accessories provide simple and rapid installation
tools for system monitoring, environmental lighting control
and architectural systems.
Each channel of a Chilli dimmer can have an individual DMX
address, preheat and a top-set level. Standard Chilli dimmers
feature single pole MCB's on each channel and Pro versions
offer neutral disconnect MCB protection per channel.
12 Memories can be stored on each dimmer and these can be
used to create 3 chase sequences of up to 12 steps each.
4, 6, 12 and 24 channel versions of the Chilli are available,
along with special 4 and 12 channel units for controlling
HF and DSI Ballasts and non-dimmable loads.
Chilli Net
Chilli has a number of features designed to meet the needs
of the professional user including a variety of playback
options, network capability through ChilliNet and comprehensive
configuration options through the backlit onboardinterface.
The ChilliNet system uses standard CAT 5 cabling to interconnect
the units in the system. Units are daisy chainedtogether
up to the maximum network limits. CAN Bus provides a stable
network protocol for ChilliNet to run over.
Zoning software allows users to assign any dimmer channel
to any one of 10 zones or areas. This enables one dimmer
in an architectural system to be used to control multiple
areas within a room or environment.
Take a nightclub, which has 6 areas, each requiring 4 channels
of dimming and localised control as an example. The zoning
software enables one 24 channel dimmer to be split into 6
areas, each area having 4 channels and each area with its
own control panel. This allows for shorter installation time
and costs as only one mains supply is needed and only one
dimmer installed.
The zoning software provides
10 Areas/Zones
1 Master Area/Zone
12 Memories Per Area/Zone
3 Assignable Sequences Per Dimmer
Alarm Input
User Selectable DMX interface relationship – DMX on/off,
DMX takes precedence, LTP or HTP.
All Chilli Dimmers are compatible with the Zero 88 Frog
Box.
Product Features
- 4 dimmer laws, selectable per channe
- 12 memories
- 3 sequences
- Topset
- DMX addressing
- Channel Preheat
- Zoning Options
- 100% Duty Cycle
- User defined backup memory
- Automatic frequency tracking 40 to 70Hz
- MCB per channel
- Optional incoming supply RCD protection
Simple User Interface
- Built in, switchable, DMX line termination
- Easy wall mount installation, four screws.
- Common Service applications need only a screwdriverl
- Convection Cooling
|
